Update Online MB Star C6 DOIP WIFI with V2023.06 Software HDD Support CAN BUS for Mercedes-Benz Car Fault Diagnosis

Product Introduction：

MB STAR C6 conforms to the SEA J2534 protocol. Professional for detecting vehicle faults via diagnostic software with laptop or computer.

Support Protocols: ISO 15765(CAN),ISO 14230,ISO 9141, J1850, ISO13400(DoIP)

Support Voltage: 16V Max

Connecting computer: option 1. By USB connecting cable. Option 2. By WI-FI

Diagnostic Software: Xen-try,DA-S,Ve-diamo, DT-S Mo-naco,ect

Support vehicle: all of 12V for Merc-edes Be-nz (Except for these non-standard protocol models 124, 140, 170, 202, 210, 463, 107, 126, 201) Supports Latest Authorization 206, 223 DOIP Vehicle.

ECU Supporting：

Available Diagnostic/ program all ECU, including:

Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go

D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)

Detection function：

1. Malfunction diagnosis (read fault codes, delete fault codes, view data flow, action test, fault guidance)

2. Programming & coding (supports offline programming of engineer version, variation coding, modification and installation, power upgrade, modification of the maximum speed limit, etc.)

3. Support simulation program, learn How to use (xen-try, D-TS,)

4. Maintenance data query, maintenance disassembly video (WI-S, Star-Finder, SD-Media)

5. Parts inquiry (EPC)

Computer configuration:

configuration CPU i5 Up, 4GB Running Memory at least.

It is recommended to use a solid-state hard disk above 256GB. The software in hard disk we provide already includes full software system. This software only available for our commodity C6 VCI. Please do not connect other devices for diagnosis. It does not allow to install other irrelevant software or drivers. If the software was damaged, please contact the supplier for remote assistance, or send the hard disk back for reinstallation.

Package List:

1 pc x C6 Main Unit
1 pc x OBD main cable
1 pc x USB cable
1 pc x Software HDD

Skype： bowshine@outlook.com

Wechat: 18098983455

Whatsapp: +86-18098983455