DUOYI DY23D Car Brake Fluid Tester with a Printer For DOT3/ DOT4/ DOT5.1 Brake Fluid meter LCD Display Printing Brake Fluid Oil Tester

Product Description

DUOYI DY23D This is a car brake fluid tester with a printer. It tests the water content of the brake fluid to determine if it needs to be changed. Applicable to DOT3/ DOT4/ DOT5.1, the built-in printer prints the test report, which is convenient for technicians to know the brake fluid status in detail from the car owner. Equipped with high precision probe and easy operation printer, this automotive high-end technology brake fluid tester is a must have tool in automotive repair industry.

FEATURES

1. Available for DOT3 / DOT4 / DOT5.1.

2. Printed Testing Report Provided.

3. 12V Automotive Battery Power Supply.

4. Build-in High Precision Probe.

5. Audible and Visual Alarm.

SPECIFICATIONS:

1. Brake Fluid Type: DOT3 / DOT4 / DOT5.1

2. Power Supply：DC 9V - 24V

3. Operation Temperature：0 ℃ ~ 5 0 ℃ 32 ℉ ~ 122 ℉

SAFETY RULES

1.This tester is only used for testing automotive brake fluid. We are not responsible for any product damage or property loss caused by using it for other purposes.

2.The use of this equipment requires professional technicians, or trained maintenance personnel, non-car repair personnel or children do not touch and use it.

ABOUT PRODUCT

① LCD Display.

② Left Button：brake fluid selection / cursor left move / numeral decrease.

③ Right Button：brake fluid selection / cursor right move / numeral increase.

④ UP Button：interface return.

⑤ Confirm Button：brake fluid confirmation / printing confirmation / numeral confirmation.

⑦ Clamps.

red clamp: connect to positive terminal of battery.

black clamp: connect to negative terminal of battery.

HOW TO OPERATION

Step 1: Connect red and black clamps to positive and negative terminals of automotive battery respectively to power on tester.

Step 2: Press Left Button and Right Button to select tested brake fluid,then press Confirm Button to confirm.

Step 3: Immerse test probe into brake fluid and press Confirm Button to test.

Step 4: Test result will be seen in LCD Display. Different result refers to different display as figures below.

Step 5: Press Confirm button to enter printing interface. Date and VIN number ( last 4 digits ) setting are available. Press Left Button or Right Button for numeral decreasing or increasing. Pressing Confirm Button is required after every digit confirmed and let cursor move to nest position, and so on. After all set, press Confirm Button to print out test result.

Packing List:

1*Print paper.

1*Main unit .

1*Alligator.

1*Probe.

1*Manual.

Skype： bowshine@outlook.com

Wechat: 18098983455

Whatsapp: +86-18098983455